BMW ICOM A3+B+C+D Diagnostic Tool technical support
1.Newest Version ICOM A2+B+C For BMW Diagnostic & Programming Tool
1.with latest Software, Adapter and WIFI .
2. It is Second generation of BMW ISTA Diagnose and programming system.
3. Best BMW ICOM.
2.How to set wifi about the item bmw icom with wifi
3.after confirmation, then boot computer.
6.And then connect icom a2 to car, wait 20 to 60 seconds, you can see the device wlan led not blinking or slowly blinking.
when you get this notice, just click ok.Ad don’t close it, just narrow it down.
recognize the device normally
3.How to enable BMW ICOM A2 to work with ISTA-P v3.59 ?
In order to enable the BMW ICOM A2 firmware to work well with ISTA P v3.59, you need a valid ICOM A2 license or ISTA-P loader firstly.
In other word, BMW ICOM A2 requires valid firmware license. If you have no license, you just update firmware to latest version and use ista-p loader v4.9 (v5.x discontinued).
Free download ISTA P Loader (for those with ista p but data is gone)
ISTA-P 184.108.40.2060 (tested OK, with Loader v4.9)
V2016.7 BMW ICOM Software HDD ISTA-D 3.55.31 ISTA-P 220.127.116.110 with Engineers Programming Windows 7 System
User feedback on ISTA/P and loader
More info on ISTA P loader:
Tried running Rheingold ISTA/P 18.104.22.168 using v3.2 loaded.
Select K+Dcan emulator, which started fine. (network tool for kdcan is necessary)
Select BMW car and ista/p loaded up.
Start new session. Fine.
Select my machine.
Select interface. all good so far.
On the next page I had a progress bar on the bottom left.
First job finished, then it said “Determining Vehicle Identification number”
Then things stopped and I got an error box come up saying:
“An error on execution of the measure.
94201 Technical service initialisation failed.
10007 (CIP)- Error during initialisation of EDIABAS.”
All help appreciated as this is getting frustrating.
Then run the network config tool for k+dcan:
Error solved. And ISTA/P works like a charm.
What to do if programming data is missing?
“Programming data” in launcher is for ISTA 4 only (I, F & G series). Requires separate install to ISTA/P.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.