Cummins inline 5 insite 7.5 Technical Support
1.The software says Expired and ask for udpate
Some of the customers may meet expired problem when load the software , that's because you need to update to V7.6.1 then to V7.6.2,please download the update files and video guide from our website.
2.If you change the system time when install the cummins ,the program might be locked ,please download the unlock package to fix the problem.
3.How to activate the Cummins INLINE 5 INSITE 7.5 7.6?
1. You will get this windows to tell you need to activate it:
2. Click "OK" and then you can get the ID, and then please send us the ID
3. We will send back the activation code to you, and then the activation is OK.
Setup Cummins inline 5 insite 7.5 USB serial port COM2
Q: cummins calterm
Can someone please help me with a program called cummins calterm,or at least help me out on how to calibrate a ECM after changing the eprom 28c64, the unit fails to communicate with the the cummins insite when I try to put in the new program by the way this is a celect plus ECM
A:Cummins Insite will only communicate with a calibrated ECM, an uncalibrated ECM will bring up a prompt for the user to install a calibration.
With a new chip, the ECM will probably be "seeded", it needs the base file installed so that Insite will recognize it as a blank "ROM booted" ECM.
To use Calterm, you need to obtain the "E2M" or "ECFG" file for the calibration you are using, these files have the ECM memory locations for the several thousand differenet parameters that make up an ECM calibration.
Calterm uses a different security than Insite, I doubt anyone has cracked it, I have not seen a keygen, or anyone offering registration codes Renesis
Most features can be enabled and disabled using Insite, search the forums, you can get the software and register it, you just need the laptop and cables and inline adaptor. if the feature cannot be disabled using Insite - there is a good reason for it
Q: How can I obtain the "E2M" or "ECFG" file for the calibration? Is it possible to extract them from the Incal DVD, or from the ECM itself? I could not find anyway to get these files. W/O them, my Calterm is basically useless.
A: You need to know someone who works for a Cummins Distributor, only a few Dealers have it, they are the only people who use Calterm. Early engines Celect, C Plus, ISM QSB VP44 and QSK use E2M files, engines after Common Rail ISBe use ECFG files. These files are not contained within the Insite calibration file as far as I know.
How to use cummins 7.5?
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.