ELM 327 1.5V USB CAN-BUS Scanner Technical Service
Check the above files about "ELM327 OBD to RS232 Interpreter, ELM 327 CAN-BUS 1.2V Changing the COM Port Numbe, elm327 english Manual, how to use ELM327 Pictures". And download them to solve your problem.
Q: v1.5 elm327 can-bus VS elm327 plastic and elm327 bluetooth?
A: they have same functions,the only different is the interface:the v1.5elm327 can-bus has both com and usb interface,elm327 plastic only has usb interface, elm327 bluetooth has no cable but it works by the bluetooth.
Q: I found an icon written on elm327 TEST, when I press this button, it says (This soft wear not installed on this version). I want to know is the TEST icon means that it will give me reports about the defects of the car or not. If it gives report I believe that this will be easily for ordinary person.
Please send to me a demo for the TEST soft wear to revise.
Also there is icon named Freeze frame, what does it mean?
A:yeah, elm327 “TEST” icon is car test function, but why it says “Display mode 5,6,&7 test results(not implemented in this version”, because you did not set elm 327 COM Port. Go to EXIT from elm327 test screen before change the COM Port number, then how to set the COM port, under the elm327 software, there is a file folder named “USB Driver”, open it you will find a PDF file named "ComPort.PDF”, it tells you how to Changing the COM Port Number, the following parts is a short instruction :
Changing the COM Port Number
With the release of V1.02.07, FTDI has introduced a properties sheet which allows the user to change the
COM port number of a USB serial port.
From DeviceManager, select "View devices by type", then "Ports (COM & LPT)". Select the USB serial port and click Properties. Select the "Port
More details uobd2 customer service will offer you elm327 video teaching you how to use elm327.
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up ELM 327 1.5V USB software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our ELM 327 1.5V USB software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
Check Customers' feedback:
A: this is how I managed to get working k-line adapter for elm327 interface and Fiat ecuscan program without any switching. First i took OBD2 female to open cable (cost about 4$) and OBD2 male connector (cost about 2$) than I soldered 1-3-7-9-12 pins with 27ohm resistors i connect them all to K-line (blue wire), I also soldered directly wires 2, 4-5, 6,14,15,16 just like in elm327 interface. I tested it on Stilo 2002, doblo 2005, bravo 1999 and punto 1999. All worked well except airbag (this is known issue) than I took KL interface and airbag also worked.
B:M8 you can solder that pins together without resitors. That multiplexor using resistors (27 OHm) you find it in a Opel Tech2 interface.For Fiat Ecuscan you can do that without that resistors, you can soldering without pin 3 ( Airbag).Well you can solder all that pins together but for your save I advise to you don't put it all together. ELM327 doesn’t support the K-line airbag protocol (KW71), so you'll not be able to do that with ELM tool just with KKL VAg com interface. Better is to put a DIP swith there and everything will be saved and no connection between ECUs.it is very good. for now i did one just for ABS, Airbag, ECU/Automatic gearbox and EPS.Not more because the FES doesn’t support more ECUs on k-line.So look what I did with a mini DIP switch
A: Yes i saw your solutions earlier but i wanted something simple also i discussed that with my friend who made visa uniscan interface like that and he told me that connecting all pins with resistors prevents communication between pins cause you get 54ohm between pins and 27 ohm from k line to each pin
B: If you say it work its ok.I will do it on my way. Completely separate.
A: Can you explain why is not recommended to connect all pins, i mean you can connect 1-7-9-12 except 3, is there some danger to activate airbag by that.
B: Yes that's right. Why do you want to risk? So the original multiplexor in Examiner can make a copleate separation between the controler. Well it is not a problem to connect all the controlers together but the Airbag it is not recomandated. Me I tested with all pins solderinged together but I did a multiplexer using a DIP switch.So I told you it isn't recomanded, not that it dosen't work.
A: Sh. it is big risk, now I am removing connection to pin 3 , I will do switch thing like you did, thanks for tip.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.