Home - Products - Mileage Correction Tool - Best Price V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit
« Go Back

Best Price V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit

Item No. SM47-D
In Stock
Retail price:US$209.00
Buy it Now (1 pcs):US$179.00 You save US$30.00
   Express Shipping Service 
Estimated delivery time: 4-10 Days.See details »
42cm*24cm*19cm      ( Inch:16.54*9.45*7.48 )
Return for refund within 30 days,buyer pays return shipping.Read details »
Related Download Files:
  v494-digiprog-3-vehicle-list.pdf  (58.2K)
Share |
Buy more related products and get nice price!
V4.94 Digiprog III Digiprog3 Multi Languages Odometer Master Programmer Entire Kit With ST01 ST04 Adapter
Low Cost V4.94 Digiprog3
1.It is a cost-effective mileage correction tool,
2.supports multi-language and full range of vehicle.
3.V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.    More Details »
Retail price: US$259.00Buy it Now (1 pcs): US$189.00  27%  You save US$70.00
Add to Cart
Low Cost V4.94 Main Unit Of  Digiprog III Digiprog 3 Odometer Programmer With OBD2 ST01 ST04 Cable
Cheapest main unit of Digiprog 3 III with OBD2 cable ,software version is V4.94
With the use of the new Digiprog III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.    More Details »
Retail price: US$159.00Buy it Now (1 pcs): US$135.00  15%  You save US$24.00
Add to Cart
Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.

Best Price V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit


Kindly note:

It cannot support AUDI A1 A3 Golf 6.
This is newest version Digiprog3 with most competitive price.

V4.94 Add Model List:

Audi :
-A3 new version
Ford :
-F150 24C16
-Falcon 24c02
Mercedes :
-W176 new version
-W204 new version Diag
-W212 new version Diag
Opel :
-Insignia new version
-Astra new version

V4.93 digiprog 3 odometer programmer:

For Audi :
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes :
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford :
Kuga Transit
For VW :
Amarok Polo Johnson

V4.94 Digiprog3 Odometer Master Programmer Feature:

1. Power-On Password:1
2. Newest Version: V4.94
3. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
4. Worldwide leader in digital speedo programming and correction software.
5. Quality standards are second to none.
6.Years of experience in digital vehicle engineering.
7. Professional technical service. 

Digiprog 3 V4.94 Other Features: 

1. Service interval adjustments and settings

Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication

Some Important Tips for Using Digiprog 3:

1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.

Digiprog 3 Menu:

1. EEPROM Menu

The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.


This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.

3. Motorcycle Menu

This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.

4. Special Functions Menu

The special functions menu is for use only by official DigiProg dealers.

5. Setup Menu

This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.

Using the EEPROM Menu:

On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

Package List:

1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters

Digiprog III V4.94 Screen Display:

Best Price V4.94 Digiprog III 1

For any question, please contact us at:


Email: sales@careucar.com       
MSN:  careucar@hotmail.com
Skype: careucar
Hot line: 0086-18359214901/ +8615759264783

If you have any problems, please do not hesitate to contact us.

How to make purchase on CareUcar?
shopping process in careucar

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.
Maybe you also like ...
Best price Main Unit of V4.94 Digiprog III Digiprog 3 Odometer Programmer with OBD2 Cable
Bookmark It