Original Chip Lexia-3 lexia3 V48 PP2000 V25 for Peugeot and Citroen Support 307/C5 with Diagbox V7.76 (buy SP08-D SP08-D1 SP08-C1 instead)
Express Shipping Service
Estimated delivery time: 4-10 Days.See details »
- 29cm*22cm*8cm ( Inch:11.42*8.66*3.15 )
- Return for refund within 30 days,buyer pays return shipping.Read details »
Multiple language available.
Original Chip Lexia-3 lexia3 V48 PP2000 V25 Diagnostic Tool for Citroen/Peugeot
Newest version :
Top 7 Reasons to get the Lexia-3 lexia3 V48 PP2000 V25 Diagnostic Tool
1.Lexia-3/PP2000 can be updated by CD and specially for Peugeot/Citroen.Now it supports Peugeot 307 .
2.performs nearly all functions like the original dealer diagnostic tool.
3.It equipted with original chip which promises the good quality.
4.Different languages supported:English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
5. Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
6. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
7. PP2000 have 2pcs Optocouplers.
Note : Install PP2000 Lexia software and Diagbox Software on different PC. They cannot be installed on the same PC.
1. It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models. If you have this type of car, please pay attention, please check with us first before purchase.
2. It is compatible with most Peugeot cars from 1995. Now it can support Peugeot 307.
3. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Lexia-3 Hardware and Software Requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
What is the difference for SP08-C leixa 3 and SP08-D lexia 3?
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x Instruction for Installation and Activation DVD for PP2000
Lexia-3 Sofware Display:
PCB Mainboard Display:
For more question on Lexia-3 PP2000, please go to "Technical Service"
Q1: when install Lexia-3 Diagbox software, error message reading "ERROR Lexia: error during installation of Lexia. You have to reactivate to restart the installation."
A1: Your computer system isn’t compatible with the software; please use Windows XP operation system.
Q2: Does Lexia test the tire pressure?
A2: If your car has Tire pressure control unit, lexia-3 can test the tire pressure.
Q:after plug the USB cable to the Lexia-3 (item NO. SP08-C), the indicator lights flash and off, off and flash, not stable.
A: Is the USB cable also connected with the car? Check whether the USB cable is not connected well with the computer.
Q: yes, I do. I try on several cars, does not work either.
A: try to use another USB cable, if it will not work either, contact us, maybe it needs to return to us for check.
Q4: Does Lexia-3 work with Peugeot 308?
A4: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008.
Q5: Can Lexia-3 (item NO: SP08-C) work with Peugeot Partner Tepee B9 2011 diesel car?
A5: this car model is included in the supported carlist, so far no users feedback this car is not supported.
Q6: Is PPS compatible with Peugeot 307 HDI?
A6: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.
Q7: Can Lexia-3 PP2000 (item NO. SP08-C) work with Peugeot 407 2005, after install the NEW DPF, can I reset DPF counter? After Eolys is full, can I reset Eolys counter?
A7: PP2000 supports Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven't tested it.
Q9: During the installation of Lexia-3, I got ERROR reading "Failure of the activation (error 20).
A9: we are so sorry; we used to store the lexia3 pp2000 software and diagbox v6.01 software in the same one CD, now they are separately stored into two different CD. Please download diagbox V6.01 software at: http://www.chinaautodiag.com/download/diagbox-v6.01-setup.zip and try to reinstall, if it does not work either, contact us we will ship you CD.
Q10: I install diagbox software on Windows XP3, 32BIT, but it can't communicate with the car, besides, I install PPS software in another computer (Win XP, 32bit, SP3), I successfully active it, but can't communicate with the car either, what's the problem?
A10: Try to install Lexia3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, or your computer system is not compatible with diagbox software, we will produce video tutorial on how to install Diagbox, please check it in the column "video".
Q11: It can do C5 cars?
A11: It is not stable for c5 cars, you'd better not choose this for c5.
Q12: It can be updated?
A12: It is updated by CD.
Q13: I have installed it on windows 7 system, but it cannot work, what is the problem?
A13: It can only be installed on XP system; you need to change another computer with XP system.
For any question, please contact us at:
If you have any problems, please do not hesitate to contact us.
How to make purchase on CareUcar?
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.